Company References Support Contact Legal

Start Breaker testing Products Order & quotes Training & Education Downloads
SA10 SA5 BTS2000A OLM POB35AD DCR30 SF6 DCM

 

 

DCM-logotyp-dynamic-contact-measuring-nov-2013-01.jpgDMC - Both side grounded

 

The fast and safe way of testing your HV Circuit breakers using

With the new tool for the Elcon products Switch Analyzers SA10 and SA5, the DCM (Dynamic Contact Measurment), will it be possible to do all the tests and analyzes you are used too, but faster and even both side grounded. The SA10 itself can only measure dynamic contact on one contact a time, but with the new DCM tool it is possible to measure at the same time up to 2 contacts in series for each phase , total 6 contacts at the same time. Or a single phase operated CB with up to six contacts in series.

You can perform tests with both sides of the circuit breaker grounded and you don’t need to rewire between the single tests. This is a great safety advantages for the maintenance personal, since they do not need to go up and done so many times to do rewiring.

The personal will not so often be exposed to danger, like live bus bars or induction.

Related documents

Related documents

Hardware specification DCM

 

 

One close and open operation will give you all the information you need to do the analyze in the BTS11 software,

such as;

  • Operation time
  • Coil current
  • Coil voltage
  • Travel
  • Speed
  • Damping
  • Static and Dynamic resistance
  • And much more...

Connection example

The DCM Kit consists of one DCM-CU-unit and, three DCM-2-units, and all necessary cables and connector’s in a transport case.

DCM-CU-unit is connected to the SA10 or SA5 wireless or with a communication cable.

DCM-2-units are hooked up at each phase close to the contact chambers, and the measuring cables from the DCM-2-units are connected to the CB.


 

Example of operations done with the DCM tool

  • Close
  • Open
  • C-O
  • Min function coil voltage
  • Spring charge(motor curent)
  • Slip coupling
  • Damping curve
  • Static resistance
  • Dynamic resistance

 

Other testing possibilities and features

  • Define the trig conditions. Contact, coil, travel or analogue trig
  • Choose sampling rate. Up to 50 kHz
  • Up to three analogue and/or digital transducers used simultaneously
  • Complete curve customizability. Colour, visibility, filled or regular, scale etc
  • Easy functions/guides for calibration
  • Speed and acceleration curves
  • Define any number of Speed, Distance or Time measurements

Test reports

  • Create your own test report templates using the dynamics that MS word provides. Multi lingual
  • Extensive protocol functions to meet any customers demands
  • Digital signing options
  • Automatic compressing and preparing protocols for email or web-publishing
  • Built in pdf support

 

 

 

 


 

Copyright 2009

 

Designed by Xpresso Publishing