Google Translate Widget by Infofru

Author Site Reviewresults

Download details

BTS11 V1.5.0.33 2016-06-13 BTS11 V1.5.0.33 2016-06-13

Only registered and logged in users can download this file.

This is the complete installation for the circuit breaker test software  BTS11. 

Used for SA10, SA5, DCM2, BTS2000, BTS2000A.

To install the program you must have administrator rights.

To make sure that you are an administrator on the computer, right-click the installation icon for the program, and then click Run as administrator. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

Note that "Use separate settings for all users" option will install database and settings files into 'My DocumentsBTS11' folder. Make sure that your 'My Documents Folder' is not stored on a network drive when using this option.

MS Word is required for protocol printout.

This is the complete installation for the circuit breaker test software   BTS11. 
Used for SA10, SA5, DCM2, BTS2000, BTS2000A.
To install the program you must have administrator rights.

To make sure that you are an administrator on the computer, right-click the installation icon for the program, and then click Run as administrator.   If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

Note that "Use separate settings for all users" option will install database and settings files into 'My DocumentsBTS11' folder. Make sure that your 'My Documents Folder' is not stored on a network drive when using this option.

MS Word is required for protocol printout.

This software works for the following 32 and 64 bit Microsoft Office systems.

Microsoft Office 2003
Microsoft Office 2007
Microsoft Office 2010
Microsoft Office 2013
Microsoft Office 365 desktop version
Microsoft Office 2016

This software works for the following 32 and 64 bit Microsoft operating systems. 

Microsoft Windows XP SP3 or later
Microsoft Windows XP Pro SP3 or later
Microsoft Windows 7 Home Basic SP1 or later
Microsoft Windows 7 Home Premium SP1 or later
Microsoft Windows 7 Professional SP1 or later
Microsoft Windows 7 Enterprise SP1 or later
Microsoft Windows 7 Ultimate SP1 or later
Microsoft Windows 8
Microsoft Windows 8 Pro
Microsoft Windows 8 Enterprise
Microsoft Windows 8.1
Microsoft Windows 8.1 Pro
Microsoft Windows 8.1 Enterprise
Microsoft Windows 10 Home
Microsoft Windows 10 Pro
Microsoft Windows 10 Enterprise
Microsoft Windows 10 Education

Version History

Version 1.5.0.33
1. Increase performance unpacking bookmarks.
2. Updated versions of USB/RS232 Drivers.
3. Updated firmware for DCM2, CM50.
4. SA10 Fix bug of viewing Im/Um and Ic/Uc afterwards in “Graph settings” even if they are not shown when the operation was performed / saved. If the “Test definition” for a Test in the “Test object” changes to show / not show these parameters, all previously saved curves will be displayed in the same way.
5. Fix bug for making a Motor operation after a Close operation
6. Possibility to viewing measurement points for Travel curve parameters at DCM-measurement.
7. CM50 Fixed bug when calibrating output current. 
8. CM50 Possibility to set current when testing in service menu.
9. Added ‘Connect Control Unit’ in Service menu to connect to a different device or switch between Bluetooth and serial port.
10. SA10: Fix bug fin DCM result window for scaling current curves if all voltage curves are removed in “Analyze” window.
11. Fix bug for viewing/not viewing command buttons in graph window for different tests.
12. Operation checks C-oper, O-oper and CO-oper will also be check for DCM-measurements.
13. Antipump test now detects all contacts selected in input connection to determine open or close position. Increased motor wait time to 3 minutes in case of sequential spring charge.
14. Fixed bug could wrongfully detect AC voltage on coil in operation window when no voltage connected. 
15. Fixed POB power supply is allowed to measure +-2 volt incorrect from set value.
16. New protocol templates for “Operations” and “Field protocols”
17. Various minor fixes

Information
Created 2020-01-26
Changed 2020-05-15
Version V1.5.0.33 2016-06-13
Size 109.43 MB
Created by Elcon AB
Changed by Ronny Jakobsson
Downloads 4
License

Software & Support

Customer Login

 

Where to find us?

Address
Hyttrisvägen 27, SE-770 14 Nyhammar. Sweden
Phone Number
+46-(0)240-64 11 10
Email: info@elcon.se
Order: order@elcon.se
Don't have an account yet? Register Now!

Sign in to your account